Grafisk Maskinfabrik | Coaters
Grafisk Maskinfabrik
DeutschEnglishEspañolFrançaisNederlands
AC500 Coating line



The AC500 coating lines is an universal coating machine for water or UV (optional) based coatings/varnish. The machine can run inline or offline at speeds upto 50m/min. Typical applications are full flood varnish, spot varnish (optional) and priming substrates before printing them on a digital press (HP Indigo digicoat, Saphire coating etc).

Please note that this model can be delivered with an internal unwind and rewind if needed.

SPECIFICATION
Maximum web width 330mm (13")  or 500mm (20")       
Minimum web width 200mm (77/8")          
Maximum mechanical speed 50 metres  per minute (Optional 100 meters /min)
Note maximum speed depends upon substrate and coating          

COATING SYSTEM          
• Flexographic printing station          
• Cylinder range 254mm-482mm (10"-19")          
• 1/8" pitch gearing          
• Incorporating a quick change cassette system enabling the          
complete ink tray removed in seconds          
• Ink train consisting of ink tray, ceramic anilox roller, rubber meter          
roller and reverse angle doctor blade          
• Automatic throw off on stop          
• Blown hot air drying system          

OPTIONAL EXTRAS          
• Corona discharge unit for conductive/none conductive materials          
• Electronic web guide with ultrasonic sensor          
• Additional flexo cartridge          
• Additional coating roller          
• Ink pump          
• Servo re-registration device          
• Additional anilox rollers          
• Air cooled UV drying system          
• Scissor slitting unit including 3 knives          
• Razor blade slitting cassette          
• Pneumatic lay on roller          
• Overlaminating system