UCE500 Sheeter with Lamination and Flexo

UCE500 Sheeter with Lamination and Flexo

The converting line consists of a UV varnish, lamination/supergloss length slitting and a sheeter module. This means that the line can make both roll-to-roll and sheeted products. Operation can be both inline with a dancer or offline (optional unwind module). Typical applications are banners, folders, post cards and roll-to-roll printed labels (not die cut). Single unit in-line or off-line converting for digital workflows.



The line is operated by a touch display and available for web widths of 330mm (~13.0”) or 515mm (~20.3”). The sheeting is done by a guillotine cutter, which is also suitable for cutting heavy materials. The sheeter easily adjusts to cutting by label gaps, length or print marks with a resolution of 0.1mm (~0.004”) and an approximate accuracy of ± 0.15mm. The machine can be supplied with rotating length slitting. 


  • UV flexo varnish 
  • Ultrasonic web guide 
  • Pneumatic 76 mm spindles 
  • Dual 76 mm rewind with Ø500 mm capacity 
  • Conveyer for sheeted products 
  • Optional hot-air for aqua varnish 
  • Touch display setting of label quantity per sheet and other job information 
  • Conveyor belt with setting of sheets per stack and total number of sheets 
  • Automatic register control adjusts for changes in the web speed (cut to mark) 


Optional equipment

  • Length slitting knives (rotary top and bottom cutter) max. 6 knives. (Also for retro fitting)
  • Separate unwind section, max. roll diameter 1000mm (~39.4”)
  • Hot-air module for Aqua varnish
  • Jogger table for sling stacking
  • Spot varnish
  • Corona treater
  • Back scoring / Perforation



  • Length: 3880mm
  • Width: 1290mm
  • Height: 1620mm
  • Weight: 1500kg – 1800kg (depending on options)



Specifications Metric Imperial
Cutting accuracy approx +/- 0,15mm ~0.006”
Max. web width 330/515mm ~13.0”/20.3”
Min. web width 30mm ~1.8”
Max. sheet length 9999mm ~393.7”
Min. sheet length 10mm ~0.4”
Unwind mandrel diameter
40 - 180mm ~1.6 - 7.1”
Max. unwind diameter
(internal unwind section)
800mm ~31.5”
Max. roll weight, unwinding 150 kg ~331
Max. web speed 30m/min  

The web speed is limited to max. 30 m/minute and max. 14,000 sheets/hour and varies consequently according to the selected cutting length. The speed is typically 3,000 - 10,000 sheets/hour, subject to the job.


Roll to sheet guillotine cutter suitable for cutting labels and heavy materials

The HS30 rotary sheeter is a cut-to-mark high-speed sheeter for 30” wide web.