Coolie 350 DHF

Coolie 350 DHF

The Coolie 350DHF is an electric/hydraulic roll lifter/roll turner enabling rolls to be taken down from a pallet, turn them from horizontal into vertical position and place them either on the floor or directly in the rewind/unwind section of a machine.

CHARACTERISTICS

The Coolie-series are hydraulic roll lifters/roll turners to enable production rolls to be taken down from a pallet, turn them from horizontal into vertical position and place them either on the floor or directly in the rewind/unwind section of the machine where the roll is to be handled. All models have the possibility for a laterally mover able arm and remote control.

Optional

  • Centre mandrel Ø70mm
  • Adapter from Ø70/76mm (~2.8/3.0 in) to Ø152,4mm (~6.0 in) centre mandrel
  • Long pressing plates (clamps) for holding soft, special materials or wide rolls. In that case, the maximum clearance height is reduced by 100mm and the minimum roll width is increased by 100mm only applies to coolie 200.
  • Extension (for centre mandrel) for wide rolls (The minimum roll width is reduced to 180 mm)  
Features Metric  
Lifting height 2520mm  
Clearance height 2230mm  
Max. roll diameter 1300mm  
Min. roll diameter 400mm  
Max. roll width 500mm  
Min. roll width 160mm  
Max. roll weight 350kg  
Lifts per charge >200  
TECHNICAL SPECIFICATIONS
Specifications Metric  
Core diameter 76mm  
Expansion mandrel Yes  
Roll clamp Double  
Turning motor Hydraulic  
Laterally moverable arm Yes  
Motorized No  
Battery charger Built-in  
Energy meter Yes  
Battery [AH] 2x12V/40AH  
Dimension (HxWxL) 1970x810x1600  
Weight 500Kg  

RELATED PRODUCTS

A simple, practical and cost efficient roll turner available with various options.

Strong electro-hydralic roll lifters for efficient roll handling

Strong electro-hydralic roll lifters for efficient roll handling 

 

Motorised roll lifter/roll turner enabling rolls to be taken down from a pallet