LC330 Compact Laser

LC330 Compact Laser Finishing

The LC330 is a compact, economic and fully digital laser finishing machine. Simply download the file from the pre-press department and the laser module is ready. The system can be fitted with an optional barcode reader for faster reload of existing jobs. The laser power ranges from 100-400 Watt (400-1000 Watt peak). It is possible to cut with different power levels on the same label. The standard LC330 has laser die, slitting and dual rewind. The unit is prepared for flexo varnish, spot varnish, lamination, cold foil and automatic knife box.


The GM LC330 comes on a standard 1m GM frame and is designed to fit into any GM converting line with minor electrical and mechanical modifications. A typical configuration is flexo-graphic varnish, laser cutting slitting and rewind - but other ore complex setups are possible.

    With near zero setup time for existing jobs and five minutes setup for new jobs this system counters the challenges of smaller runs and shorter lead times, thus ensuring day-to-day delivery of labels. An investment in the LC330 will give you continuous production and unlimited repeat lengths to increase efficiency and productivity.
    Save the cost of buying conventional die plates, and spare the time spent setting up a new job. The LC330 will increase the flexibility of your production facility to take on short runs and lead times, and is almost certainly the most cost-efficient laser die cut solution.
    The LC330 system can be upgraded up to 1000 W. The laser mirror system and control cards will remain in the unit - only the laser source is upgraded. This ensures a long lifetime of the machine and the full benefit of future low cost high power lasers
Specifications Metric Imperial
Web width 50mm - 330mm 2” - 13”
Substrate  50gsm - 200gsm  
Speed  Up to 72m/min (236ft-min) depending on laser
power/cut pattern 
Max. Internal unwind Ø700mm 27.6”
Max. Single or dual shaft rewind Ø450mm  17.7” 
Core diameter 76.2mm or 152.4mm 3” or 6”
Laser Die
Power  100W, 250W or 400W  
Laser Type Single head pulsed CO2  
Laser Spot Size 350μm
Flexo Station
Cylinder Size (Cliché) 254mm - 482.6mm 10” - 19”
Spot varnish option
(digital sensor register control)
Slitting Station
Knife Type Pneumatic crush, shear or razor knife
Minimum distance crush 12.7mm 0,5
Minimum distance shear  10mm 0,4
Power/Air  3x400v+N+PE, 32A / 5bar
Dimensions (WxDxH) 3.3m x 2.4m x 1.7m 
Exhaust UV Ø100mm, 800m3/h. Outside
Exhaust LASER Ø160mm, 800m3/h. Outside


The DC330HYBRID is the perfect solution for digitally printed webs.