Provides UV flexo-varnish, die-cutting, slit and rewind on one single compact platform. The drive train in the DC330 series of machines is completely servo driven offering low maintenance, stepless tension control and good registration. Minimum waste die dials in within one rotation. No station movement or mechanical setup needed and lastly graphical touch screen which shows the machine configuration, spindle directions and web-up.
The DC330MINI has all you need to convert labels. Varnish, semi rotary die cut, slit and dual rewind. Optional spot varnish, cold foil, lamination, inline buffer, corona, web clean, back scoring, razor slitting and more.
Precision cutting and fast register
Reduce waste, print-to-cut registration in just one rotation; no station movement or mechanical setup required; semi and full rotary die cutting.
Speed and versatility
Adjustable repeat lengths from 2”-22”; line speeds up to 40m/min. The unit can be configured for both inline and offline operation.
Measuring only 2.5m x 1.4m (8.2ft x 4.6ft) this compact design will fit into any shop.
The DC330MINI integrates the most advanced converting and finishing techniques available today. When used together with a digital label press, this innovative unit gives professional label printers a complete and versatile solution for high volume digital printing.
The DC330mini can be equipped with many options like Spot varnish, cold foil, Corona and the popular Auto-knife to set the slitting blades in seconds. If you have many short run jobs, this is option is a real money saver. See the fully "loaded" configuration below. This unit has both the Auto-knife and the web-advance holders for fast roll change.
See the DC330mini convert labels with an HP indigo digital label press here:
The lamination module on the DC330mini can be used to add effects like cold foil, super gloss, super matt and holograms (cast'n'cure) to your web. This will make your labels stand out! See a demonstration video here:
The the DC330mini with optional memjet inkjet modul here:
Grafisk Maskinfabrik can help & advice on how to setup a Label Shop. Select die cutting plates, design jobs and find good suppliers of substrates, inks and other equipment to run a full print shop. We have more than 30 years experience. Feel free to contact us!
|Web width||50mm - 330mm||2” - 13”|
|Substrate||50gsm - 200gsm|
|Die plate size (repeat)||50mm - 558.8mm||2” - 22”|
|Max. Internal unwind||Ø700mm||27.6”|
|Max. Single or dual shaft rewind||Ø450mm||17.7”|
|Core diameter||76.2mm or 152.4mm||3” or 6”|
|Cylinder size (Cliché)||254mm - 482.6mm||10” - 19”|
|Spot varnish option
(digital sensor register control)
|Knife Type||Pneumatic crush, shear or razor knife|
|Minimum distance crush||12.7mm||0,5”|
|Minimum distance shear||10mm||0,4”|
|Power/Air||3x400V+N+PE, 32A / 5bar|
|Dimensions (WxDxH)||2.2m x 1.5m x 1.7m|